TL;DR: EDLA Certified Smart Payment Terminal with GPIO Expansion
AndroidSBC release: twelve-configuration smart payment terminal board family opens for volume export orders serving international market, Portugal. The WF-SPT-05 smart payment terminal Android motherboard covers the dual-screen smart payment terminal build for chain checkout and eleven sister configurations in the WF-SPT series, spanning the RK3576 quad-core ARM Cortex-A72 2.2GHz plus quad-core ARM Cortex-A53 1.8GHz SoC with the ARM Mali-G52 MC3 GPU, 8-inch 1280x800 eDP main panel plus 4-inch customer screen, and Android 14 with AOSP baseline and optional GMS firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-SPT family from the Longgang source factory in Shenzhen to international market and Portugal importers who build countertop payment terminals, self-service kiosks, unattended vending and locker machines, transit ticketing gates and outdoor charging pillars.
About AndroidSBC and the Smart Payment Terminal Android Motherboard Family
The WF-SPT line exists because payment hardware buyers in Portugal rarely want a new board design - they want the same board with a different modem, a different panel and a different certification file. AndroidSBC holds those variables inside one family, and the international market buyer picks the configuration rather than commissioning a new PCB. AndroidSBC holds a fixed bill of materials per production lot, which is the part international market buyers care about most: the board that passed qualification is the board that arrives in volume, twelve months later, on the same peripheral contract.
WF-SPT-05 Technical Specifications
| Parameter | AndroidSBC WF-SPT-05 (dual-screen smart payment terminal build for chain checkout) | Industry Average |
|---|---|---|
| Processor | RK3576 quad-core ARM Cortex-A72 2.2GHz plus quad-core ARM Cortex-A53 1.8GHz SoC | Older dual-core or quad-core Cortex-A7 SoC |
| Process node | 8nm | Older 40nm process |
| GPU | Mali-G52 MC3 | Older Mali-400 or basic 2D GPU |
| Memory | 8GB LPDDR5 | DDR3 512MB or 1GB on competing boards |
| Storage | 128GB eMMC plus TF card up to 256GB | NAND flash 4GB or 8GB on competing boards |
| Display and touch | 8-inch 1280x800 eDP main panel plus 4-inch customer screen with 10-point capacitive touch with glove and wet-finger support | 4.3-inch 480x800 panel with resistive touch |
| Payment and capture | NFC contactless, IC card, magnetic stripe and QR with secure element | Camera-only QR capture with no scan engine |
| Printer and peripherals | 80mm thermal printer header with 180mm per second output | No printer control header on competing boards |
| Wireless and positioning | dual-band WiFi 6 with Bluetooth 5.4 and optional 5G sub-6 modem | Single-band 2.4G WiFi 802.11n with no modem |
| Interfaces | 1 USB Type-C host and OTG, 2 USB host, 1 RS232, 1 HDMI out, 8 GPIO, 1 thermal printer header | One USB port and no RS232 |
| Operating system | Android 14 with AOSP baseline and optional GMS | Android 9 or Android 10 on competing boards |
| Power and reliability | 12V DC input with 5V/3A peripheral rail, dual-cell RTC and watchdog, -20C to 60C operating ambient | No battery management and no watchdog |
All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-SPT-05 (dual-screen smart payment terminal build for chain checkout) holds the touch panel, the thermal printer, the reader and the scan engine together while running the 72-hour burn-in loop, a configuration that competing single-platform boards rarely document at the top of the temperature window. For Portugal importers sourcing the WF-SPT family, the WF-SPT-05-A variant is the typical configuration for the hypermarket and supermarket chain checkout lanes use case, in a payment terminal footprint with a sustained weekly capacity of 5000 pcs/wk.
Challenges in Sourcing Smart Payment Terminal Android Motherboards for Portugal Buyers
Attended and unattended payment hardware share a board but not a duty cycle. The international market buyer who specifies a single configuration for both usually ends up over-specifying the counter and under-specifying the kiosk.
Certification is not a one-time event in Portugal. When the acquiring partner updates a kernel version or a contactless limit, the international market integrator needs a board supplier who can reissue the file rather than renegotiate the design. AndroidSBC plans the international market rollout around the Lisbon - Shanghai lane and a 6th release slot, so the 22500 board sample lot and the volume order ride the same documentation set rather than two different ones.
Competitive Comparison: WF-SPT-05 vs Competing Smart Payment Terminal Motherboards
Competing boards in this class usually quote a chip and a price. AndroidSBC quotes a configuration: the printer profile, the reader antenna specification, the modem band list, the firmware window and the compliance set for Portugal.
- vs consumer tablet boards: the WF-SPT family carries a printer control header, a reader antenna reference design and a scan engine UART mapping, none of which exist on a tablet derivative board.
- vs single-configuration boards: twelve configurations share one peripheral contract, so a international market buyer can move from a countertop lane to an unattended kiosk without re-qualifying the printer or the reader.
- vs boards without a firmware plan: signed images, staged OTA groups with rollback and a published maintenance window come standard, where competing boards ship an image and leave the Portugal integrator to manage it.
- vs re-spun designs: the bill of materials is frozen per production lot for the length of the agreement, so the board that passed qualification in international market is the board that ships in volume.
Global Cashless Payment, Smart Terminal and Self-Service Checkout Market Trends
The dual-screen smart payment terminal build for chain checkout sits in the middle of a market that is growing on formats rather than on unit replacement. Every new unattended format in Portugal is a new terminal, and every new terminal is a board decision for international market buyers.
- Countertop tier: WF-SPT-02 covers contactless, IC card, QR and receipt printing in one board, which is the configuration most staffed lanes standardise on.
- Unattended tier: WF-SPT-08 pairs the modem with the printer header and the watchdog for vending, lockers and kiosks where nobody is there to reboot the terminal.
- Flagship tier: WF-SPT-11 adds the larger memory and storage bundle, the customer-facing screen option and the wider temperature window that outdoor and high-throughput formats require.
Market growth in Portugal does not automatically translate into margin for the integrator. The programmes that pay are the ones where the board arrives qualified, documented and repeatable, which is the gap AndroidSBC is built to close for international market.
WF-SPT-05 Application Scenarios
The WF-SPT-05 dual-screen smart payment terminal build for chain checkout sits inside a twelve-configuration WF-SPT Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-SPT-05-A configuration is the typical build for the hypermarket and supermarket chain checkout lanes use case, with printer current profile, scan engine mapping and staged OTA management bundled.
- Convenience and grocery counters: the WF-SPT-12 takes contactless, IC card and QR at the till and prints the receipt in one pass.
- Restaurant and quick-service counters: the WF-SPT-11 runs order entry, payment and kitchen ticket printing on the same board.
- Unattended vending and lockers: the WF-SPT-08 pairs the modem with the printer header and the watchdog for sites with no staff present.
- EV charging and fuel forecourts: the WF-SPT-09 holds the wide input range and the sunlight readable panel through a full outdoor season.
- Transit gates and event entry: the WF-SPT-05 takes contactless payment and prints the entry ticket without a fixed counter.
- Self-checkout lanes: one board drives the main panel, the scanner and the receipt printer, with the customer screen option where the format needs it.
- Hotel and resort reception: card pre-authorisation, signature capture and folio printing on a board that also runs the restaurant terminal.
- Hospital and clinic payment desks: card, QR and insurance capture on a locked-down build with staged OTA and an audit trail.
- Government and municipal counters: tax, permit and fee payment on a configuration held for the length of the agreement.
Partnership Models for international market Buyers
international market buyers usually land on one of three tracks with AndroidSBC, and the difference between them is how much of the integration the partner wants to own.
- Distribution track: the partner buys the WF-SPT board against a published price list, keeps its own stock, and AndroidSBC supplies the printer profile, the scan mapping and the compliance documents with each lot.
- Integration track: the partner takes the board plus firmware customisation, receipt and language localisation and peripheral validation support, with a joint qualification run at the Longgang factory.
- Private-label track: the WF-SPT board ships under the partner brand with customised boot logo, packaging, enclosure and documentation, on a fixed bill of materials held for the length of the agreement.
Every track ends the same way in Portugal: the board arrives with its test report, its certificate set and its signed firmware image, whether or not it carries the partner brand in international market.
Frequently Asked Questions
Does the smart payment terminal board family support a dual-screen payment terminal build for chain checkout?
Answer: Yes. The dual-screen payment terminal build for chain checkout is a stock configuration on the smart payment terminal board family from AndroidSBC. All twelve configurations are validated against the same Android build and the same peripheral contract before shipment to Portugal.
Which configurations are available in the WF-SPT family for Portugal buyers?
Answer: The family spans RK3576 plus eleven configurations covering countertop, unattended, outdoor, hospitality and multimedia formats, all documented in one delivery file for international market.
Can one smart payment terminal board drive a touch panel, a thermal printer and a scan engine at once?
Answer: Yes. The board is specified for concurrent panel, printer and scan operation, with the peripheral contract documented so a international market integrator can swap mechanisms without a board change.
What payment scheme certification support does AndroidSBC provide for Portugal?
Answer: AndroidSBC ships the CE / FCC / RoHS set plus ANACOM conformity with every lot, and supports CE marking with ANACOM radio interface notification testing for the Portugal configuration through the qualification run at the factory.
What is the minimum order quantity and the sample lead time for Portugal?
Answer: Sample orders start at a single configuration and ship in 1-3 days from Shenzhen. Volume pricing begins at 500 boards, and the international market lot is quoted against a published price list.
Is custom ROM, boot logo or pre-installed app development available?
Answer: Yes. Custom ROM, boot logo and pre-install work is scoped as an engineering item and delivered with the board, so the Portugal integrator receives a terminal that boots into its own application.
How are firmware updates delivered to a Portugal device estate after deployment?
Answer: Staged OTA groups are created during qualification, so the international market estate is never updated in a single wave, and every image carries a signature the terminal verifies before it applies.
What shipping terms does AndroidSBC support for Portugal orders?
Answer: Standard terms are FOB Shenzhen and CIF Port of Lisbon, with DAP available for international market programmes where the partner wants a single invoice through to delivery.
Contact AndroidSBC: Start Your WF-SPT-05 Sourcing Conversation
Partners in international market can start with a single sample configuration or with a full estate specification - both routes end at the same production slot and the same compliance file.
- Email: Androidsbc@163.com
- Export service hotline: +8613261677119
- Website: https://www.androidsbc.com
- Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China
AndroidSBC is the export arm of Wanlin Manufacturing Group and is recruiting Portugal distributors, integrators and brand partners for the smart payment terminal board family. Sample dispatch for international market runs in 1-3 days.
