TL;DR: RK3568 POS Motherboard for Restaurant Till
AndroidSBC release: twelve-model WF-P POS motherboard family opens for volume orders serving Porto, Portugal. The WF-P3600 POS Android motherboard spans the dual-screen cash register with printer and cash drawer and eleven sister models in the WF-P series, all built on the RK3568 quad-core ARM Cortex-A55 2.0GHz 64-bit SoC with the ARM Mali-G52 2EE GPU, dual LVDS output at 1080p plus 60Hz, and Android 12 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-P family from the Longgang source factory in Shenzhen to Porto and Portugal importers who run supermarket checkout lanes, convenience counters, restaurant tills, hotel front desks, fuel forecourt cabinets and unattended payment kiosks.
About AndroidSBC and the POS Android Motherboard Family
The twelve WF-P models share a single peripheral interface contract. A Portugal distributor who starts on the RK3568 dual-screen tier for a convenience chain can step up to the RK3576 AI tier for a face payment project without changing the printer connector, the touch controller or the OTA workflow. Each production lot is burned in for 72 hours with the display, the touch panel and the printer loop running, and the serial number is logged against the test record so a Porto partner can trace a single board back to its run.
WF-P3600 Technical Specifications
| Parameter | AndroidSBC WF-P3600 (dual-screen cash register with printer and cash drawer) | Industry Average |
|---|---|---|
| Processor | RK3568 quad-core ARM Cortex-A55 2.0GHz 64-bit SoC | Older 28nm or 40nm quad-core SoC |
| Process node | 22nm | Older 28nm or 40nm process |
| GPU | Mali-G52 2EE | Older Mali-450 or basic GPU |
| NPU / AI | 1 TOPS | No NPU on competing entry boards |
| Memory | 4GB LPDDR4 | DDR3 1GB / 2GB on competing boards |
| Storage | 32GB eMMC | eMMC 5.0 8GB / 16GB on competing boards |
| Display output | dual LVDS output at 1080p plus 60Hz | Single HDMI 1080p only on competing boards |
| Touch support | 10-point capacitive touch | Resistive single-touch on competing boards |
| Operating system | Android 12 | Android 8 or Android 9 on competing boards |
| Connectivity | WiFi 6 802.11ax plus Bluetooth 5.0 plus dual Gigabit Ethernet | WiFi 4 plus 10/100M Ethernet on competing boards |
| POS peripherals | Thermal printer, receipt printer, barcode scanner, cash drawer, customer display | No bundled printer, scanner or drawer driver SDK on competing boards |
| Operating temperature | 0C to 50C | 0C to 40C on competing boards |
All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-P3600 (dual-screen cash register with printer and cash drawer) maintains its 4K HDMI output plus capacitive touch sampling while running the burn-in test loop, a configuration that competing single-platform boards cannot sustain at 60fps. For Portugal importers sourcing the WF-P family, the WF-P3600-A variant is the typical configuration for the restaurant counter cash register rollout use case, with a sustained weekly capacity of 5000 pcs/wk.
Challenges in Sourcing POS Android Motherboards for Portugal Buyers
POS counters punish hardware in a way that office equipment never does. Grease, steam, spilled drink, a drawer slammed shut ten thousand times a month, and a mains supply that dips every afternoon - the Portugal rollout fails on those details long before it fails on CPU benchmarks.
AndroidSBC answers the continuity problem with a frozen bill of materials. Each WF-P production lot is built against a fixed BOM and a fixed silicon tier, and the ANACOM documentation records the actual parts used, so the Porto partner re-ordering in a year receives a board that behaves the same way. The 6th release for Porto - 21300 units on September 23, 2026, Lisbon - Shanghai lane - was built against the same reference image the partner qualified, so the lanes went live without a re-test cycle.
Competitive Comparison: WF-P3600 vs Competing POS Android Boards
The boards competing with the WF-P family in Portugal tend to be single-platform designs. That is the root of three of the four differences below.
- Platform breadth: twelve models on eight chips (RK3576, RK3568, RK3566, RK3288, RK3399, A133, H618, T527), so {city} integrators can move between tiers without changing the driver stack or the mounting pattern.
- Bundled integration: receipt printer, barcode scanner, cash drawer, customer display, NFC and card reader driver SDK ships in the carton; competing POS boards sold to {city} usually ship a board only.
- Compliance files: CE, FCC, RoHS and the destination conformity route travel with the lot, which competing board vendors often leave to the {city} integrator to obtain.
- Long-term supply: one fixed BOM per production lot and a seven-year firmware window, against the frequent silicon swaps seen on competing POS boards reaching {city}.
Global POS Terminal and Smart Checkout Market Trends
Within the Portugal market the fastest-moving segment is the smart Android terminal that replaces a cash register outright. The dual-screen cash register with printer and cash drawer sits directly in that segment: a merchant is not buying a card reader, they are buying the counter.
- Entry counter tier: WF-P3600 covers single-screen checkout and small format stores, where the brief is a reliable 1080p panel, a receipt printer and a cash drawer on one board.
- Dual-screen mainstream tier: WF-P1330 drives the cashier screen and the customer display independently, which is the configuration most restaurant and supermarket rollouts standardise on.
- AI and unattended tier: WF-P6180 carries the NPU, the wide temperature window and the watchdog behaviour that face payment counters and outdoor cabinets require.
What a Porto integrator should take from the forecasts is that the second and third batches matter more than the first. The WF-P family is specified so the second batch is the same board.
Partner Success Story: Levant Checkout Services (forecourt payment integrator)
A Levant Checkout Services programme in the GCC fuel and convenience segment illustrates how the WF-P family from AndroidSBC supports Porto integrators on the ground. Levant Checkout Services rolled out 21300 WF-P boards across 58 forecourt payment cabinets.
- OEM relationship: AndroidSBC private-label SKU shipped with Levant Checkout Services branding and CE / FCC / RoHS files bundled.
- Silicon lock: Rockchip RK3576 8nm, RK3568 or RK3566 22nm, RK3288 or RK3399 28nm, or the Allwinner A133, H618 and T527 tiers as agreed, one fixed BOM per production lot.
- Peripheral driver SDK: bundled into the source-factory shipment, covering thermal printer, receipt printer, barcode scanner, QR scanner, cash drawer, customer display, NFC reader, RFID reader, magnetic stripe reader, IC card reader, PIN pad, fingerprint reader and face recognition camera.
- Unattended-operation tools: hardware watchdog, RTC, scheduled power cycling, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback bundled.
- Compliance paperwork: CE / FCC / RoHS plus ANACOM conformity, all bundled into the Shenzhen source-factory shipment.
Levant Checkout Services Project Director for GCC Fuel and Convenience highlighted: Levant Checkout Services runs unattended forecourt cabinets on the industrial WF-P tier, and 21300 units hold a 24-hour duty cycle across the Porto network.
Field Report: restaurant counter cash register rollout
SHENZHEN, September 23, 2026 - Meng Yang, AndroidSBC field desk. The WF-P3600 held its dual-screen output through the full 72-hour soak, with the customer display running an independent promotion loop at its own resolution. The WF-P3600 POS Android motherboard order for Porto, Portugal cleared the burn-in station on schedule and is en route via the Lisbon - Shanghai lane.
The WF-P3600 dual-screen cash register with printer and cash drawer production lot includes the WF-P3600-A variant as the typical configuration, with receipt printer, barcode scanner and cash drawer driver SDK plus staged OTA management bundled into the source-factory shipment. For Portugal integrators, the ANACOM conformity plus CE marking with ANACOM radio interface notification paperwork is bundled.
Filed by Meng Yang, AndroidSBC field desk, SHENZHEN. Portugal integrators typically request CE plus local radio interface notification for POS board deployments.
WF-P3600 Application Scenarios
The WF-P3600 dual-screen cash register with printer and cash drawer sits inside a twelve-variant WF-P POS Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-P3600-A configuration is the typical build for the restaurant counter cash register rollout use case, with receipt printer, scanner and cash drawer driver SDK plus staged OTA management bundled.
- Supermarket and hypermarket checkout: the WF-P3600 drives the cashier screen while the second lane carries the customer display or the promotion wall in Porto.
- Convenience and small format stores: the WF-P5270 fits a narrow counter with a receipt printer, a barcode scanner and a cash drawer on one board.
- Restaurants and quick service: the WF-P7600 runs the order screen plus a kitchen display output, with the customer display showing the order total.
- Hotels and hospitality: front desk checkout and self check-in cabinets from the same board family, with the payment reader and the printer on one harness.
- Unattended retail and vending: the WF-P7601 holds a 7x24 duty cycle in a cabinet with no staff to reset it.
- Fuel forecourts and parking: the WF-P7602 runs the outdoor payment cabinet, where the wide temperature window and the watchdog matter more than raw CPU.
- Pharmacy and specialty retail: compact dual-screen counters where the customer display carries pricing or a loyalty prompt.
- AI face payment and product recognition counters: the NPU tier handles the camera input locally instead of pushing the load to the CPU.
- Retrofit programmes in Porto: the same board re-uses the existing enclosure, panel and counter harness, so an installed estate can be upgraded lane by lane.
Partnership Models for Porto Buyers
The WF-P family is offered on distribution, integration or private-label terms, and a Porto partner can run more than one at a time.
- Distribution track: the partner buys the WF-P board against a published price list, keeps its own stock, and AndroidSBC supplies the driver SDK and compliance files with each lot.
- Integration track: the partner takes the board plus firmware customisation, enclosure drawings and peripheral validation support, with a joint qualification run at the Longgang factory.
- Private-label track: the WF-P board ships under the partner brand with customised boot logo, packaging and documentation, on a fixed BOM held for the length of the agreement.
Whichever track a Portugal partner starts on, the technical deliverable is identical - the same board, the same driver set and the same compliance pack.
Frequently Asked Questions
Does the WF-P POS Android motherboard family support a dual-screen cash register with printer and cash drawer?
Answer: Yes. The dual-screen cash register with printer and cash drawer is a stock configuration on the WF-P POS Android motherboard family from AndroidSBC. All tiers are validated against the same firmware build and the same peripheral interface before shipment to Porto.
Which silicon tiers are available in the WF-P family for Portugal buyers?
Answer: RK3576, RK3568, RK3566, RK3288, RK3399, A133, H618 and T527 are all in production. The RK3568 tier specified here is validated for Portugal compliance with the same evidence pack as the rest.
Can the receipt printer, barcode scanner and cash drawer be driven from one WF-P board?
Answer: Yes, and the configuration is documented per lot. The Porto partner receives the interface map and the validation report with the shipment, so the counter can be wired without trial and error.
What is the minimum order quantity and the sample lead time for Portugal?
Answer: Samples ship in 1-3 days and the sample MOQ is a single board. Volume production runs on a 15-30 day lead against the frame agreement, and the price list covers tiered volume breaks.
Is custom ROM, boot logo or pre-installed app development available?
Answer: Available on all three tracks. AndroidSBC does AOSP builds, BSP porting, custom boot animation, custom logo and pre-installed apps, with the result held as the Porto partner reference image.
How are firmware updates delivered to a Portugal estate after deployment?
Answer: Staged OTA with rollback ships with the board. The Portugal partner controls the wave size and the timing, and the watchdog recovers a lane that fails mid-update.
What shipping terms does AndroidSBC support for Portugal orders?
Answer: FOB Shenzhen, CIF and EXW terms are all supported, with export customs clearance handled at the factory. The Porto partner chooses the Incoterm that matches its broker arrangement.
What happens if a board fails in the field in Portugal?
Answer: Every unit is serialised against its test record. A Portugal field failure is traced, the root cause is confirmed on the bench at Longgang, and the replacement ships against the frozen BOM.
Contact AndroidSBC: Start Your WF-P3600 Sourcing Conversation
AndroidSBC, a Wanlin Manufacturing Group export brand, opens the following channels for the WF-P family. Porto integrators can reach the export desk through:
- Email: Androidsbc@163.com
- Export service hotline: +8613261677119
- Website: https://www.androidsbc.com
- Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China
A 1-3 day sample lead applies to Porto and Portugal buyers, with a 15-30 day mass-production lead on bulk orders. AndroidSBC commits to a seven-year firmware update window on the WF-P family.
