TL;DR: POS Motherboard 21.5-Inch Screen Driver for Restaurant Till
AndroidSBC sourcing desk: dual-screen POS board pricing held flat through the current quarter serving Porto, Portugal. The WF-P7600 POS Android motherboard spans the dual-screen POS terminal with cashier and customer display and eleven sister models in the WF-P series, all built on the RK3576 octa-core ARM Cortex-A72 2.2GHz plus Cortex-A53 64-bit SoC with the ARM Mali-G52 MC3 GPU, LVDS plus HDMI dual independent output at 1080p, and Android 13 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-P family from the Longgang source factory in Shenzhen to Porto and Portugal importers who run supermarket checkout lanes, convenience counters, restaurant tills, hotel front desks, fuel forecourt cabinets and unattended payment kiosks.
About AndroidSBC and the POS Android Motherboard Family
For Porto integrators the WF-P family answers the question that usually blocks a rollout: will the board drive both the cashier screen and the customer display, and will the cash drawer fire on the right pulse. AndroidSBC ships the dual-screen configuration, the RJ11 or RJ12 drawer header and the printer handshake as a validated set, not as a list of interfaces on a datasheet. Each production lot is burned in for 72 hours with the display, the touch panel and the printer loop running, and the serial number is logged against the test record so a Porto partner can trace a single board back to its run.
WF-P7600 Technical Specifications
| Parameter | AndroidSBC WF-P7600 (dual-screen POS terminal with cashier and customer display) | Industry Average |
|---|---|---|
| Processor | RK3576 octa-core ARM Cortex-A72 2.2GHz plus Cortex-A53 64-bit SoC | Older 28nm or 40nm quad-core SoC |
| Process node | 8nm | Older 28nm or 40nm process |
| GPU | Mali-G52 MC3 | Older Mali-450 or basic GPU |
| NPU / AI | 6 TOPS | No NPU on competing entry boards |
| Memory | 8GB LPDDR4X | DDR3 1GB / 2GB on competing boards |
| Storage | 64GB eMMC | eMMC 5.0 8GB / 16GB on competing boards |
| Display output | LVDS plus HDMI dual independent output at 1080p | Single HDMI 1080p only on competing boards |
| Touch support | 10-point capacitive touch on both panels | Resistive single-touch on competing boards |
| Operating system | Android 13 | Android 8 or Android 9 on competing boards |
| Connectivity | WiFi 6 802.11ax plus Bluetooth 5.0 plus dual Gigabit Ethernet | WiFi 4 plus 10/100M Ethernet on competing boards |
| POS peripherals | Thermal printer, receipt printer, barcode scanner, cash drawer, customer display | No bundled printer, scanner or drawer driver SDK on competing boards |
| Operating temperature | 0C to 50C | 0C to 40C on competing boards |
All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-P7600 (dual-screen POS terminal with cashier and customer display) maintains its 4K HDMI output plus capacitive touch sampling while running the burn-in test loop, a configuration that competing single-platform boards cannot sustain at 60fps. For Portugal importers sourcing the WF-P family, the WF-P7600-A variant is the typical configuration for the supermarket checkout lane rollout use case, with a sustained weekly capacity of 5000 pcs/wk.
Challenges in Sourcing POS Android Motherboards for Portugal Buyers
The first obstacle Porto buyers hit when sourcing POS boards out of China is not price, it is continuity. A board qualified in January arrives in June with a different eMMC part, and the receipt printer that worked in the pilot stops responding on the second batch.
The fiscal layer is handled in firmware. Receipt templates, log retention and the fiscal printer handshake are configured before shipment, and the Port of Lisbon lane is booked against a production slot so the Porto pilot batch lands inside the store opening window. By September 23, 2026 the Porto partner had taken delivery of 46100 boards across the Lisbon - Shanghai lane, with no silicon substitution between the pilot batch and the first volume release.
Competitive Comparison: WF-P7600 vs Competing POS Android Boards
What follows is not a spec-sheet comparison. It is the four questions a Porto chain asks after its first failed rollout.
- Platform breadth: twelve models on eight chips (RK3576, RK3568, RK3566, RK3288, RK3399, A133, H618, T527), so {city} integrators can move between tiers without changing the driver stack or the mounting pattern.
- Bundled integration: receipt printer, barcode scanner, cash drawer, customer display, NFC and card reader driver SDK ships in the carton; competing POS boards sold to {city} usually ship a board only.
- Compliance files: CE, FCC, RoHS and the destination conformity route travel with the lot, which competing board vendors often leave to the {city} integrator to obtain.
- Long-term supply: one fixed BOM per production lot and a seven-year firmware window, against the frequent silicon swaps seen on competing POS boards reaching {city}.
Global POS Terminal and Smart Checkout Market Trends
Fixed countertop terminals still account for the largest share of the market by product type, and hardware remains the largest share by component. That matters to a Porto buyer because it means the board is the part being replaced, while the enclosure, the panel and the counter harness are often re-used.
- Entry counter tier: WF-P7600 covers single-screen checkout and small format stores, where the brief is a reliable 1080p panel, a receipt printer and a cash drawer on one board.
- Dual-screen mainstream tier: WF-P7602 drives the cashier screen and the customer display independently, which is the configuration most restaurant and supermarket rollouts standardise on.
- AI and unattended tier: WF-P3600 carries the NPU, the wide temperature window and the watchdog behaviour that face payment counters and outdoor cabinets require.
The Portugal demand curve rewards the vendor who can hold a configuration. AndroidSBC publishes the WF-P price list, MOQ and lead time because a Porto partner is budgeting a multi-year refresh, not a single purchase order.
Partner Success Story: Levant Checkout Services (forecourt payment integrator)
A recent Levant Checkout Services deployment in the GCC fuel and convenience segment shows how the WF-P POS Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand, supports Porto integrators. Levant Checkout Services rolled out 46100 WF-P boards across 58 forecourt payment cabinets.
- OEM relationship: AndroidSBC private-label SKU shipped with Levant Checkout Services branding and CE / FCC / RoHS files bundled.
- Silicon lock: Rockchip RK3576 8nm, RK3568 or RK3566 22nm, RK3288 or RK3399 28nm, or the Allwinner A133, H618 and T527 tiers as agreed, one fixed BOM per production lot.
- Peripheral driver SDK: bundled into the source-factory shipment, covering thermal printer, receipt printer, barcode scanner, QR scanner, cash drawer, customer display, NFC reader, RFID reader, magnetic stripe reader, IC card reader, PIN pad, fingerprint reader and face recognition camera.
- Unattended-operation tools: hardware watchdog, RTC, scheduled power cycling, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback bundled.
- Compliance paperwork: CE / FCC / RoHS plus ANACOM conformity, all bundled into the Shenzhen source-factory shipment.
According to Levant Checkout Services Project Director for GCC Fuel and Convenience: Levant Checkout Services runs unattended forecourt cabinets on the industrial WF-P tier, and 46100 units hold a 24-hour duty cycle across the Porto network.
Field Report: dual-screen checkout lane rollout at a regional supermarket group
NANSHAN, September 23, 2026 - Lai Feng, AndroidSBC field desk. For the dual-screen POS terminal with cashier and customer display brief the WF-P7600 was configured with the barcode scanner on USB and the printer on RS232, the combination the Portugal partner runs in production. The WF-P7600 POS Android motherboard order for Porto, Portugal cleared the burn-in station on schedule and is en route via the Lisbon - Shanghai lane.
The WF-P7600 dual-screen POS terminal with cashier and customer display production lot includes the WF-P7600-A variant as the typical configuration, with receipt printer, barcode scanner and cash drawer driver SDK plus staged OTA management bundled into the source-factory shipment. For Portugal integrators, the ANACOM conformity plus CE marking with ANACOM radio interface notification paperwork is bundled.
Filed by Lai Feng, AndroidSBC field desk, NANSHAN. Portugal integrators typically request CE plus local radio interface notification for POS board deployments.
WF-P7600 Application Scenarios
The WF-P7600 dual-screen POS terminal with cashier and customer display sits inside a twelve-variant WF-P POS Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-P7600-A configuration is the typical build for the supermarket checkout lane rollout use case, with receipt printer, scanner and cash drawer driver SDK plus staged OTA management bundled.
- Supermarket and hypermarket checkout: the WF-P7600 drives the cashier screen while the second lane carries the customer display or the promotion wall in Porto.
- Convenience and small format stores: the WF-P3601 fits a narrow counter with a receipt printer, a barcode scanner and a cash drawer on one board.
- Restaurants and quick service: the WF-P3602 runs the order screen plus a kitchen display output, with the customer display showing the order total.
- Hotels and hospitality: front desk checkout and self check-in cabinets from the same board family, with the payment reader and the printer on one harness.
- Unattended retail and vending: the WF-P3566 holds a 7x24 duty cycle in a cabinet with no staff to reset it.
- Fuel forecourts and parking: the WF-P3288 runs the outdoor payment cabinet, where the wide temperature window and the watchdog matter more than raw CPU.
- Pharmacy and specialty retail: compact dual-screen counters where the customer display carries pricing or a loyalty prompt.
- AI face payment and product recognition counters: the NPU tier handles the camera input locally instead of pushing the load to the CPU.
- Retrofit programmes in Porto: the same board re-uses the existing enclosure, panel and counter harness, so an installed estate can be upgraded lane by lane.
Partnership Models for Porto Buyers
For Porto and Portugal buyers the question is rarely which board, it is which relationship. Three tracks cover the answers.
- Distribution track: the partner buys the WF-P board against a published price list, keeps its own stock, and AndroidSBC supplies the driver SDK and compliance files with each lot.
- Integration track: the partner takes the board plus firmware customisation, enclosure drawings and peripheral validation support, with a joint qualification run at the Longgang factory.
- Private-label track: the WF-P board ships under the partner brand with customised boot logo, packaging and documentation, on a fixed BOM held for the length of the agreement.
Entry to any of the three tracks starts with a sample batch and a peripheral validation run, and Portugal partners usually convert within one quarter.
Frequently Asked Questions
Does the WF-P POS Android motherboard family support a dual-screen POS terminal with cashier and customer?
Answer: Yes. AndroidSBC validates dual-screen POS terminal with cashier and customer on the bench with the actual peripherals the Porto partner intends to use, and the result is written into the shipment file.
Which silicon tiers are available in the WF-P family for Portugal buyers?
Answer: Available tiers are RK3576, RK3568, RK3566, RK3288, RK3399, A133, H618 and T527. AndroidSBC holds one fixed BOM per lot, so the Porto partner always knows which tier is shipping.
Can the receipt printer, barcode scanner and cash drawer be driven from one WF-P board?
Answer: Yes. AndroidSBC validates the exact combination on the Longgang bench using the Porto partner printer and scanner models, and the validated configuration is locked as the production reference.
What is the minimum order quantity and the sample lead time for Portugal?
Answer: For Porto buyers the entry point is a single sample board on a 1-3 day lead. Volume follows a 15-30 day production slot, booked against an allocation rather than quoted spot.
Is custom ROM, boot logo or pre-installed app development available?
Answer: Yes. AndroidSBC provides custom Android AOSP builds, custom boot animation and logo, pre-installed apps, custom UI, BSP porting and SDK modules, all built against a frozen BOM.
How are firmware updates delivered to a Portugal estate after deployment?
Answer: Firmware is delivered over the network or by USB, with a staged release and a rollback path. AndroidSBC commits to a seven-year update window on the WF-P family.
What shipping terms does AndroidSBC support for Portugal orders?
Answer: AndroidSBC quotes FOB Shenzhen, CIF and EXW, and handles export customs clearance and global shipping. The Porto partner books the lane that suits the import process.
What happens if a board fails in the field in Portugal?
Answer: The RMA path uses the board serial number to identify the production lot, then replaces from stock held for the Porto programme so the lane is not down for a full lead time.
Contact AndroidSBC: Start Your WF-P7600 Sourcing Conversation
Porto integrators can reach the AndroidSBC export desk for the WF-P POS board family through the following channels:
- Email: Androidsbc@163.com
- Export service hotline: +8613261677119
- Website: https://www.androidsbc.com
- Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China
A 1-3 day sample lead applies to Portugal buyers and a 15-30 day mass-production lead to bulk orders. AndroidSBC, a Wanlin Manufacturing Group export brand, commits to a seven-year firmware update window on the WF-P family.
